May 2010
Vents help food processing and agricultural facilities remain OSHA and NFPA compliant
Broken Arrow, Okla. (May 13, 2010) – Leading pressure relief manufacturer Oseco will feature its full line of explosion vents at the National Fire Protection Association (NFPA) 2010 Conference and Expo, June 7-10 at the Mandalay Bay Convention Center in Las Vegas, Nev. Oseco’s explosion vents, including the new GLV-F, will be available for hands-on demonstration at the company’s booth, #1658.
Oseco’s will feature its full line of explosion vents, including the GLV-F (pictured) at the NFPA 2010 conference, booth #1658.
The GLV-F explosion vent mounts where dust builds in conveyors and grain elevators. Should a deflagration occur, the vent opens up and releases pressure to minimize damage. An optional sensor is available, which detects when an explosion occurs and either shuts the system down or sounds an alarm to notify personnel. The GLV-F has a built-in outlet frame and gasket to ease installation, eliminating the need to fabricate an angle iron hold down frame. The product meets NFPA 61 standards for the prevention of explosions in agricultural and food processing facilities.
Oseco’s full line of explosion vents meets OSHA and NFPA 68 standards for venting explosions and deflagrations. Explosion vents are an accepted method of compliance with inspection guidelines outlined by the OSHA Combustible Dust National Emphasis Program.
Comments (0) »
March 2010
Full line of explosion vents including GLV-F on display at booth 2442
Broken Arrow, Okla. (March 22, 2010) – Intelligent pressure relief specialist Oseco will feature its full line of explosion vents at the International Powder & Bulk Solids show, May 4-6 at the Donald E. Stephens Convention Center in Rosemont, Ill. Oseco’s explosion vents, including the new GLV-F, will be available for hands-on demonstration at the company’s booth 2442.
Oseco’s full line of explosion vents, including the GLV-F (pictured) featured at booth #2442.
The GLV-F explosion vent mounts on conveyors and grain elevators where dust builds up. In the event of a deflagration, the GLV-F opens up to release pressure and minimize damage. The vent features a built-in outlet frame and gasket for easy installation, eliminating the need to fabricate an angle iron hold down frame. The GLV-F meets NFPA 61 standards for the prevention of explosions in agricultural and food processing facilities.
Comments (0) »
January 2010
Economical vent with built in gasket and frame protects equipment during deflagrations
Broken Arrow, Okla. (January 12, 2010) – Airborne dust in agricultural and food processing facilities can create extremely explosive conditions. Oseco offers simple, economical protection during deflagrations with the NFPA 61 compliant GLV-F explosion vent.
The NFPA 61 compliant GLV-F explosion vent from Oseco.
The GLV-F mounts on conveyors and grain elevators where dust builds up. In the event of an explosion, the GLV-F opens up to release pressure and minimize damage. The explosion vent is simple to install with a built-in outlet frame and gasket that eliminates the need to fabricate an angle iron hold down frame.
The product meets the requirements of NFPA 61 for the prevention of fires and dust explosions in agricultural and food processing facilities. The GLV-F is also available with an alarm sensor for automatic system shut-down after an explosion.
Comments (0) »
