Crowcon launches Gas-Tec Hydrocarbon Gas Detector for Leak Survey and Localisation

Crowcon’s new Gas-Tec portable hydrocarbon gas detector is designed for rapid leak survey and localisation in applications such as gas distribution networks and landfill sites. Using Crowcon’s tried and tested flame ionisation chamber, the Gas-Tec also features next generation technology such as GPS, data and event logging. The new device allows survey teams to track progress and quickly pinpoint and record areas of significant interest.

Crowcon’s Gas-Tec portable hydrocarbon gas detector showing a gas distribution system in the background

Crowcon’s Gas-Tec portable hydrocarbon gas detector showing a gas distribution system in the background

Photo 1: http://www.halmapr.com/crowcon/gas-tec_gas.jpg (854 KB)
(Photo caption 1: Crowcon’s Gas-Tec portable hydrocarbon gas detector showing a gas distribution system in the background)

Increasingly, gas distribution and infrastructure companies are focussing on reducing the number and volume of leaks along their pipelines. Leaks have cost, environmental and safety implications, so pinpointing and repairing them quickly is essential. Methane emitted from landfill sites also poses a severe explosion risk – it is generated during the working life of a landfill site and for as long as 40 years after a site has been covered over, so constant monitoring is essential.

Storing survey reports and service and calibration records are now a more frequent requirement, influenced by health and safety regulations. Also, with many operating companies being forced to reduce personnel, there is an increased demand for products that require minimal training and set-up times to use.

Crowcon’s Gas-Tec portable hydrocarbon gas detector showing a landfill site in the background

Crowcon’s Gas-Tec portable hydrocarbon gas detector showing a landfill site in the background

Photo 2: http://www.halmapr.com/crowcon/gas-tec_landfill.jpg (847 KB)
(Photo caption 2: Crowcon’s Gas-Tec portable hydrocarbon gas detector showing a landfill site in the background)

Crowcon developed the Gas-Tec specifically to address these issues, including features to help companies minimise leaks quickly and efficiently, with minimal manpower. GPS position logging, for example, enhances record keeping by assigning latitude, longitude and distance above sea level to data readings. Users can also view their current location, offering the precise location to back-up crews for immediate leak management. Another useful feature is data and event logging, allowing users to download full survey information for survey traceability using ‘drag and drop’ via a USB interface.

Weighing just 2.4kg (without the gas bottle), the Gas-Tec is worn across the body and is ergonomically designed to sit comfortably whilst in use. Simple and intuitive to operate, its liquid crystal display and soft keys offer full sequence instructions, in-operation options, service and calibration set-up and alerts. Menu prompts guide users through start-up and shut-down procedures, reducing training requirements. The device can also be customised, with users able to set preferences for features such as preferred units, display settings, date format and language.

Enhanced electronic controls increase battery and cylinder life, while pressure and flow transducers manage hydrogen and sample flow rates. A service and calibration timer also reminds operators when maintenance is required, ensuring the unit is always operable and in optimum working condition. The Gas-Tec also includes an optional ‘service lock’ facility, ensuring it cannot be used in the field whilst out of calibration.

Based around Crowcon’s original tried and tested Gas-Tec ‘engine’ detection method, this next generation model is already proven, fit for purpose and suited to the rigours of everyday use. With a response time of less than two seconds, the Gas-Tec is calibrated to methane, with conversion factors for other common hydrocarbons available. It has a detection range of 0 – 10,000 ppm and is accurate to within +/-10%. Battery life is over 22 hours, allowing continual use for a full shift. Battery recharge time is only 2 ½ hours.

Supplied in a wheeled ABS impact resistant case with a fitted foam insert, it is ingress protected to IP54 and can be used outdoors in all weather conditions. Accessories include a trigger survey kit and an in-vehicle survey tool allowing detection at speeds of up to 30km/hour. Probe assemblies are also available for all types of applications, including borehole, straight probe, cup attachment and detection trolley. Other useful accessories are available, such as vehicle chargers, earphones, spare hydrogen cylinders and a hydrogen filling panel.

About Crowcon
Crowcon (www.crowcon.com), a subsidiary of Halma p.l.c. (www.halma.com), is a world leader in portable and fixed gas detection instruments. Formed in 1970, the company is based in Oxfordshire in the UK and has branch offices in the Netherlands, the USA, Singapore and China. It specialises in developing, manufacturing and marketing innovative, reliable and cost-effective flammable and toxic gas detection equipment and has constantly led the field with products designed for safety and environmental monitoring.

Crowcon’s products are sold throughout the world, serving oil, gas and petrochemical companies, public utilities, clean water and sewage treatment companies, fire brigades, construction companies and other organisations where accidental leakage of gas or vapour can become a toxic or explosive danger. The company is represented in India by Detection Instruments Pvt. Ltd. in Mumbai (www.detection-india.com).

3 Responses to “Crowcon launches Gas-Tec Hydrocarbon Gas Detector for Leak Survey and Localisation”

  1. roy montemarano says:

    I work in the lanfill / gas industry.

    Can you please tell me your current price and availability?

    Also – is the instrument intrinsically safe?

    Thank you for your time,

  2. Roy Montemarano says:

    Like the idea of GPS and data logging. Not many FI, if any that have this abilitiy (except using a separate unit).

    Can you tell me the price and availablity?

    Thank you!

  3. damian says:

    Thanks for your interest in the Gas-Tec. The unit is not intrinsicallty safe but is designed instead for safe area applications. It is available for sale now – as you are based in the USA please contact our US office directly for information about lead times and prices. Tel: 800-527-6926 (800-5-CROWCON), e-mail: salesusa@crowcon.com .

Leave a Reply

css.php